Surface Rust Removal
Clear surface rust from suitable steel brackets, fixtures and machine parts. Check the exposed metal for existing pitting before refinishing.
Bring the laser sanding machine to the part you need to clean. The case houses the laser source and controls and provides dedicated storage for the handheld cleaning head and fiber cable.
Roll the machine between workstations or maintenance bays without having to carry the main unit across the shop floor.
After shutdown, stow the cleaning head and fiber cable in the case so they travel together to the next job.
The laser source is air cooled, so a separate water chiller is unnecessary when setting up at a new work area.
Use the portable MOPA system for localized cleaning on metal parts before repair, recoating or refurbishment. The right settings depend on the base metal, the layer to remove and the finish you need.
Clear surface rust from suitable steel brackets, fixtures and machine parts. Check the exposed metal for existing pitting before refinishing.
Remove selected coatings from metal during repair or repainting. Coating composition and thickness affect the number of passes required.
Assess removal of surface oxides and weld heat tint on suitable metal parts. Test a representative area to check the resulting finish.
Clean selected areas on automotive or machinery parts during maintenance. Identify the residue and any surfaces that need to be preserved before testing.
Application illustrations. Sample testing helps confirm cleaning time and surface condition for your workpiece.
Set up the cleaning process at the machine, then make adjustments from the handheld touchscreen near the workpiece.
Select a saved process group or use the advanced settings to configure scan patterns and pulse parameters for the job.
Adjust laser power, pulse width, frequency and scan settings without returning to the main unit for each change.
Save and name settings for repeat jobs so operators can recall the setup for a specific part or coating.
| Laser Type | MOPA Pulsed Fiber Laser |
|---|---|
| Laser Power Options | 200 W / 300 W / 500 W |
| Center Wavelength | 1064 nm |
| Maximum Pulse Energy | 5 mJ |
| Pulse Width Range | 10–500 ns |
| Pulse Frequency Range | 1–3000 kHz |
| Cooling Method | Air Cooling |
| Power Supply | AC 220 V |
| Fiber Cable Length | 5 m |
| Scanning Patterns | 12 |
| Machine Dimensions | 585 × 400 × 336 mm |
Available combinations of laser power, pulse width, frequency and pulse energy depend on the installed laser source. Confirm the lens and power supply requirements for the selected configuration before ordering.
Compare the three power options on a representative part. Use the required surface finish and cleaning time to decide which configuration fits your work.
Tell us the base metal and what you need to remove. If you know the approximate rust or coating thickness, include it with a clear photo of the part.
Share the area to be cleaned, how many parts you process and what happens next, such as repainting, inspection or reassembly.
Compare cleaning time and surface condition on a typical part. Use the results to select the laser power and lens for your application.
It uses MOPA laser pulses to remove surface rust, selected paints and coatings, and oxide layers from suitable metal parts. Test a representative sample to check the finish before cleaning the full workpiece.
Rust removal can expose pitting or scratches already present in the metal. If the job requires a level surface or a specified finish, assess whether the part needs a separate finishing step after cleaning.
Compare sample results using your actual material and coating. The best fit depends on the area to clean, the acceptable finish and the processing time per part.
The three power options use integrated air cooling and operate without an external water chiller.
The listed supply is AC 220 V. Share your available voltage, frequency and plug type so we can confirm compatibility for the configuration you select.
Send a clear photo or short video, the base material, what needs removing, the area to clean and the intended use after cleaning. For a shipping quote, include your destination country and postal code.